ATEX Systems

ATEX components

Antenna & radios

NEC US producs

PDF Files

Stats

   visitors

   visitors online


<? echo $statsd.">


<? echo $statspd.">


<? echo $statsm.">


<? echo $statspm.">


<? echo $statsy.">


<? echo $statspy.">


<? echo $stats_y.">


<? echo $stats_py.">


  

Ex-d equipments - Alarms
          


 
eth12md.jpg

FEATURES
The ETH series acoustic signals are recommended when it is necessary the use of a signalling bell and/or alarm, in a potentially explosive atmosphere areas.

Protection mode
II 2G Ex d IIC T6
II 2D Ex tD A21 IP 65 T85°C
Certificate INERIS 02ATEX 0001

Room temperature: -20° + 55°C

Five sound to select: BI-TONE – YELP – WAILL – INTERMITTENT – FIXED NOTE

SERVICE
CONTINOUS

CONSTRUCTION
Body and cover in copper free aluminium alloy
Stainless steel screws
One hub Ø ¾” ISO 7/1
RAL 7000 or RAL 3000 epoxy coated

OPTIONS
NPT / ISO M25 threaded
Other colours on request
Adjustable support with fixing holes
Different voltage (48V AC – 48V DC – 110V DC)

Body and cover cast –iron / St. st. 316L  

DIRECTIVE ATEX 94/9/CE
COMPLIANCE EN 60079-0 / EN 60079-1 / EN 61241-0 / EN 61241-1
INSTALLATION  Zone 1 – 2 – 21 - 22


eth20md.jpg

ACOUSTIC SIGNALLERS ETH 20MD

FEATURES
The ETH 20MD series acoustic signals are mainly used for outdoor or noisy locations where it is desired to repeat a signal in various ptially explosive atmosphere areas.

Protection mode
EEX d IIC
Certificate INERIS 02ATEX 0001
II 2 GD T6 IP 65

The sounds to select are five : BI-TONE – YELP – WAILL – INTERMITTENT – FIXED NOTE

SERVICE
CONTINOUS

CONSTRUCTION
Body and cover in copper free aluminium alloy
Stainless steel screws
One hub Ø ¾” ISO 7/1
RAL 7000 or RAL 3000 epoxy coated

OPTIONS
NPT threaded
Other colours on request
Adjustable support with fixing holes
Different voltage CA/CC

DIRECTIVE 94/9/CE
COMPLIANCE EN 50014 – EN 50018 – IEC 60079.1
INSTALLATION according to EN 60079.10 Zone 1 and 2

 

sirena_ets06.jpg

ACOUSTIC ROTARY SIREN 60-109

APPLICATION
The ETS 60 series are used in specific hazardous atmospheres as found in chemical plants, oil and gas refineries, bulk loading stations, paint and vernish manufacturing plants, grain processing industries and grain elevators, as well as in certain metal, coal, combustible fiber processing or handling areas.

Type of protection
II 2G Ex d IIC T6
II 2D Ex Td A21 IP 65 T85°C

Ambient Temperature use: -20° + 40°C

Conformity certificate: INERIS 02ATEX0001

SERVICE
INTERMITTENCE SERVICE S3 type ON 1min. – OFF 10 min. In according to EN 60034.1

CONSTRUCTION
Body and cover in copper free aluminium alloy
Stainless steel screws
One hub Ø ¾” ISO 7/1
RAL 7000 or RAL 3000 epoxy coated

OPTIONS
NPT threaded - ISO M25 X 1.5
Other colours on request
Adjustable support with fixing holes
Different voltage CA/CC

Conformity: DIRECTIVE ATEX 94/9/EC

Reference rules: EN 60079-0 / EN 60079-1 / EN 61241-0 / EN 61241-1

Suitable for zone: 1-2 (GAS)
  21-22 (DUST)

 

sirena_ets30.jpg

ACOUSTIC ROTARY SIREN ETS 30

APPLICATION
The sirens ETS 30 are used in potentially explosive atmospheres, such as chemical installations and refineries, pumping stations and in all places where there could be explosive dusts.

The ETS 30 series available in Stainless Steel 316 L version for sea environments, off-shore platforms and very aggressive chemical environments.

The cast iron version is certified for I Group of mines and galleries with presence of explosive dusts.

The particulary small size and the possibility of fixing with a stirrup in a four different positions, each of these 90° rotated on the longitudinal axle, make it a product able to provide for the various needs of installation.

Moreover all the versions are certified with a exercise temperature : -50°C to + 50°C .

Protection mode
I M2 Ex d I
II 2G Ex d II C T6
II 2D Ex tD A21 IP 66 T 85°C

SERVICE
Intermittent service S 3 ON 1 min. - OFF 10 min. in accordance with EN 60034.1

CONSTRUCTION
Copper-free alluminium alloy body and cap ( II 2 GD ) version
Stainless Steel 316 L body and cap ( II 2 GD & I M2 Ex d I ) version
Galvanized cast iron EN –GJL-200 body and cap ( I M2 Ex d I ) Version
One hub Ø ½” NPT or ISO M 20
RAL 7000 or RAL 3000 epoxy coating for the light alloy version.

OPTIONS
Other colours on request
Support stirrup

Directive 94/9/CE

Set of rules : EN 6007-0 : 2006 EN 60079-1 : 2007 EN 61241-0 : 2006 EN 61241-1 : 2004
Installation area : Zone 1 – 2 & Zone 21 - 22

 

sirena_ets60_114.jpg

ACOUSTIC ROTARY SIREN 60-114

APPLICATION
The ETS 60 series are used in specific hazardous atmospheres as found in chemical plants, oil and gas refineries, bulk loading stations, paint and vernish manufacturing plants, grain processing industries and grain elevators, as well as in certain metal, coal, combustible fiber processing or handling areas.

Protection mode
EEX d IIC
IP 65
Certificate INERIS 02ATEX 0001
II 2 GD T6 IP 65

SERVICE
INTERMITTENCE SERVICE S3 type ON 1min. – OFF 10 min. In according to EN 60034.1

CONSTRUCTION
Body and cover in copper free aluminium alloy
Stainless steel screws
One hub Ø ¾” ISO 7/1
RAL 7000 or RAL 3000 epoxy coated

OPTIONS
NPT threaded
Other colours on request
Adjustable support with fixing holes
Different voltage CA/CC

DIRECTIVE 94/9/CE
COMPLIANCE EN 50014 – EN 50018 – IEC 60079.1
INSTALLATION according to EN 60079.10 Zone 1 - 2 and 21 - 22

 

flash50.jpg

SIGNALLING LIGHTING FIXTURES EVA 50

APPLICATION
The lighting fixtures EVA serie strobe warning lights are used in hazardous industrial environments, in areas where audible signals cannot be heard, on oil rigs to warn of unsafe conditions, for plant evacuation or other communication needs.

FEATURES
Light directed in a complete hemisphere, with 360° dispersion in all axes.
Different lens colours to meet various requirements
Light weight, corrosion resistant, copper free aluminium
Protection glass borosilicate
Stainless steel guard
One hub Ø ¾” ISO 7/1 or NPT

FLASH TUBE GLOBE ASSEMBLY
Clear – Red – Green – Amber - Blue

CONSTRUCTION
Body and cover in copper free aluminium alloy
Stainless steel screws
One hub Ø ¾” ISO 7/1
RAL 7000 or RAL 3000 epoxy coated

STANDARD FINISHES :
RAL 7000 epoxy coated

DIRECTIVE 94/9/CE
COMPLIANCE EN 50014 – EN 50018 – IEC 60079.1
INSTALLATION Zone 1 and 2

 

flash200.jpg

SIGNALLING LIGHTING FIXTURES EVA 200

APPLICATION
The lighting fixtures EVA serie strobe warning lights are used in hazardous industrial environments, in areas where audible signals cannot be heard, on oil rigs to warn of unsafe conditions, for plant evacuation or other communication needs.

FEATURES
Light directed in a complete hemisphere, with 360° dispersion in all axes.
Different lens colours to meet various requirements
Light weight, corrosion resistant, copper free aluminium
Protection glass borosilicate
Stainless steel guard
One hub Ø ¾” ISO 7/1 or NPT

FLASH TUBE GLOBE ASSEMBLY
Clear – Red – Green – Amber - Blue

STANDARD FINISHES :
RAL 3000 epoxy coated

DIRECTIVE 94/9/CE
COMPLIANCE EN 50014 – EN 50018 – IEC 60079.1
INSTALLATION Zone 1 and 2

 



          

sirènes - boîtiers pour indicateurs - raccords - P.E. luminaires  ...

nous contacter pour plus d'informations

contact.jpg

Creation date : 10/01/2012 @ 10:11
Last update : 13/01/2012 @ 09:25
Category : Ex-d equipments
Page read 4806 times


Preview Preview     Print the article Print the article

 
W3C CSS Adaptation Skins Papinou © 2007 - Licence Creative Commons
^ Top ^